The RABBATH'CASE by Olivier
PHONE : 917-673-3891
My Brother and Father
The Indestructible structure
of the Soft Flight Bass Case
EMAIL : Musicbyolivier@yahoo.com
|The RABBATH'CASE by Olivier
|copyright 2019 webmaster : Harold Sayes 917-673-3891
|My Daughter Gaia testing the Case
ORDER CONFIRMATION AND INSTRUCTIONS FOR
SUBMISSION OF INSTRUMENT MEASUREMENTS
For those situations where instrument is oversized.
Step 1: Use rolled paper 36" inches in width
(Staples has Bienfang® Paper Poster Rolls, 36"W x 25
yds., White Paper ). If impossible to find, please
choose something similar.
Step 2: Roll out paper on flat surface. Cut 2 pieces,
each approximately 8 inches longer than the instrument.
Place them side by side, and overlap until you have
enough width to draw the silhouette of your
instrument with a 3-inch margin on sides. Tape securely
along the middle.
Step 3: - Lay down instrument approximately 4 inches
from top, leaving 3 inches on each side.
Step 4: Beginning from paper edge, using a soft pencil,
carefully trace instrument around edges.
Step 5: Mark the position of the bridge and measure
it's highest point.
Step 6: Cut paper, leaving 2 inches at base and top
Step 7: Roll and mail in tube available at an offices
supply or possibly your post office. Priority Mail
Packaging is free, if tube size is available.
If necessary to fold paper to fit into tube, fold along
Be sure that tape is not disturbed.
Clearly print all measurements. Print Name and Contact
information on sheet.
A check for total amount due should be included with
specifications to complete Order.
ON APPOINTMENT ONLY